Bypass-Less Slide-In System
White Magic's exclusively enginereed
HeatSmart™ Technology (patent-pending)
	Finally! A residential Slide In Machine that offers incredible performance and quality. This single wand machine delivers up to 230° working water temperatures with revolutionary Heatsmart Technology and does not bypass water. Built with high quality components such as Stainless Steel, Last Step Chemical Pump, Automatic Heat Diverter, and much, much more. The Rebel is quickly taking the market by storm. If you're looking for a great residential Slide In Machine, check out the revolutionary Rebel!
"GET MORE WITH LESS" *All features subject to change without notice. All specifications are subject to change without notice. Major components specifications are manufacturers maximum ratings. System is de-rated for maximum life. Engine and blower are used to 70-80% capacities. System pressure is set at 1200 PSI.

PERFORMANCE
ROOTS™ 33 Blower		13-14” Hg Max.
CAT PUMP ® 3CP Pump		3.6 GPM
Engine Speed		3600 RPM
Water Temp		230ºF
Water Pressure		500 - 1200 PSI *
CFM Rating		170 - 200 CFM
DIMENSIONS
Height		25”
Length		40”
Width		29”
Weight

Rebel External features and benefits:

1. Recovery Tank: All White Magic tanks have been developed through many years of research and development. Utilizing heavy gauge marine aluminum this non-corrosive material is 50% thicker than other manufacturers. Far superior to tanks made of heavy stainless steel or plastic, our tanks are formed with wide radius dies to eliminate cracking. Internal air deflectors and baffles provide maximum airflow throughout the tank and minimize the potential of debris being drawn into the filter.

2. Dual Wand Port: This simple & quick Dual Recovery Tank port allows for Dual wand operation with just the snap of the hose.

3. Recovery Tank Access Port: This lightweight panel is easily removed to gain access to the inside of the recovery tank. This panel has a durable self-sealing gasket, which prevents any vacuum loss.

4. Vacuum Relief: All carpet-cleaning systems have a Vacuum relief or commonly called vac break. This easy to adjust relief system is located off of our filter hosing. The vacuum relief performs a vital function in the operation of the machine. It allows air to enter the vacuum system when the airflow has been restricted, preventing over heating of the Vacuum blower.

5. In-line Filter: A 6” diameter, 11” long high volume stainless steel filter protects the vacuum blower from possible debris damaging the internal components of the Vacuum Blower. This filter is placed externally on the tank maximizing the tank capacity with no wasted recovery space. With just a turn of a few quick release finger nuts the filter swings out of the way for cleaning and access to the inside of the tank.

6. Automatic Shut Off Switch: This high level switch shuts down the carpet cleaning system when the recovery tank becomes full. This reduces the debris from clogging the filter prematurely and protects the blower.

7. Sight Tube: There is no need to guess how full your recovery tank is. All White Magic tanks come complete with the easy to read level sight tube. A red float indicator instantly shows the operator the available capacity of the tank.

8. Console Cover: Important part of the design the console cover can quickly be removed to gain access to the machine with in seconds. The console covers on the rebel are fastened with industrial strength Velcro. The console cover, does more then just add aesthetics to the machine, but serves to prevent heated air to re-circulate through the engines intake fan. The design of the console cover forces the heated air to travel back to the rear of the machine and disperse into the van.

9. Progressive Silencing System: White Magic engineers have worked tirelessly to maximize performance without restricting airflow. The Progressive Silencing system works by stepping down the noise generated by the carpet cleaning system at specific locations throughout the machine. Illustrated in this photo is the input silencer to the Vacuum Blower.

10. Blower Oil Level Sight Tube: Easy to read tube is visible through the side panel without having to remove them. The blower oil sight tube has red high and low markings so that with just a glance the operator can know how much oil is in the blower.

11. Side Panels: The Signature Series slide in machine are all equipped with light- weight durable aluminum covers and panels. Powder coated to resist scratching and wear, these panels can quickly be removed for 100% access to the internal components of the machine. Its primary feature is to prevent the re-circulation of heated air from the system back to the engine’s intake.

12. Recovery Tank Drain: The recovery tank is equipped with a 2” drain assembly, which allows for fast dumping of the tank. Its location is especially important and allows the drain assembly to be installed in unused space located behind the seats of the vehicle.

13. Access Door: Both sides of the machine are equipped with access doors, these doors allow for easy checks and routine service of the machine.

14. Indicator Lights: The machine will tell the operator the status of the operating features of the machine. When these lights are activated they will inform the operator which system has shut down the unit. These safety features include: low engine oil switch, full recovery tank & high solution temperature. A green light indicates activation of the heat diverter system.

15. Tachometer: White Magic slide-in machines are all equipped with a digital tachometer and hour meter. Produced by Kohler this precise gauge gives the true RPM of the engine.

16. Solution Temperature Gauge: Designed for ease of operation, simply pull the trigger and watch your temperature soar. The gauge will read up 330°F and its sending unit is placed right before the heated solution exits the machine. This added benefit allows the operator to know the exact temperature (within a few degrees), at the wand output.

17. Choke & Throttle: Very user friendly, the choke and throttle cables easily pull out and with just a twist locks at the desired setting.

18. Vacuum Gauge: This glycerin filled gauge displays the vacuum lift of the blower, routine check of this gauge during operation will help determine if maintenance of the vacuum system is required.

19. Blower Lubrication Port: Conveniently located on the face panel of the machine, allows for proper lubrication of the blower.

20. Water Recovery Switch: With just a flip of this switch the machine can go from normal carpet cleaning operation in to water extraction. When this switch is activated it automatically turns the pump clutch off and closes both of the heat diverters. Now with no heat entering the heat exchange system and the pump not working the machine can run for days with out ever having to supply the machine with water. This is an absolute must for water damage operations. (Pump Clutch Only Available in the Commander & HO Models.)

21. Temperature Control: This fully adjustable feature controls the Heatsmart system. When the desired temperature is selected the machine automatically regulates the exhaust diverters to maintain the proper temperature.

22. Engine Kill Override: When one of the three kill switches shuts the machine down, by pressing this button it allows the operator to diagnose the systems and make corrections to restart the machine.

23. Auto Pump-out Control: Every White Magic machine is pre-wired for our external Auto Pump-out System regardless if the machine is ordered with one or not, its there for future use if necessary. 24. System Exhaust: Chrome plated will look great even after years of use. The exhaust from both the blower and engine exit the machine through the face panel. It can also be installed so the exhaust may be run down through the floor of the vehicle.

25. Sub-frame Panel: is easily removed for installation and access to the fork lift pads. It is then replaced to cover the forklift pad adding a nicer appearance to the machine after the install is completed.

26. Oil Drain Valve: All the oil drains on the machines are plumbed into a central line that is accessible in the front of the machine. This allows for simple oil changes with little or no mess to clean up after. No more spilling oil all over the inside of the machine ever again.

27. Overflow Protection: This port allows for the proper operation of both the water box and fresh water tank (if equipped) and prevents premature failure of the water system.

28. Auxiliary output Valve: This allows access to warm water straight out of the face panel of the machine. It is an outstanding benefit for filling sprayer or diluting chemicals.

29. Water Supply Input: Whether the machine is equipped with a fresh water tank or not, the water supply is connected here.

30. Air Intake: The point where cool air is drawn into the engine to maintain proper operation of the engine.

31. Solution Disconnects: Located far away from any electrical components. The disconnects allow for easy hook up of live reels or wands.

32. Control Panels: All three of the control panels of this machine are made from a special fade and stain resistant Lexan material bonded to an aluminum plate. This durable feature will look like new for years.

33. Chemical Selector Valve: This three-way valve allows the operator to turn on, off, or prime the chemical system. The priming mechanism is vacuum assisted which allows a complete & instantaneous prime each and every time.

34. Chemical Flow Meter: The chemical flow meter displays the flow of chemical going to the cleaning tool. Read in GPH (gallons per hour) this is a more consistent chemical flow compared to other systems that meter CCM.

35. Chemical Adjustment Knob: By tuning this knob allows the operator to adjust the chemical flow from 0-5 gph.

36. Unloader Valve: This allows the operator to adjust the working pressure of the pumping system of the machine. Unlike a pressure regulator system the unloader valve releases the pressure off of the pump and pump components preventing premature failure of the pumping system.

37. Pressure Gauge: The pressure gauge displays the setting of the unloader valve and the pressure output of the pump.

38. Partition Baffle: (face panel) One of the most important features of any air-cooled slide in system, but the most over looked is the Partition Baffle. The Partition Baffle is responsible in preventing re-circulation of heated air generated by the engine & heat exchange system. All White Magic slide-ins have been designed with this feature in mind. The signature series partition baffles are connected by gasket material to the air intake of the engine housing to ensure that proper air flow is achieved.

39. Ignition: Remote Ignition located on the front of the face panel allows for easy access to start the machine

	STANDARD PACKAGE   • ROOTS™ 33 Blower • Kohler 15 Hp Engine • CAT PUMP ® 3cp Pump • Final Stage Chemical Injection Pump • Bypass-less Heat Exchanger • 80 Gallon Recovery Tank • Stainless Steel High Volume Air Filtration w/Relief • Progressive Silencing System • 12” SS 2 Jet Scrub Wand • Vacuum Hose 2" x 150' • Vacuum Lead Hose 1.5" x 12' • Solution Hose 150' With Disconnects • Wand Mounting Bracket • Automatic Heat Diverter • Cold Water Adapter • Five Gallon Chemical Jug W/Stainless Steel Tray • Service Manual • 12 Month Warranty • Pulsation Dampener

Left side view:

1. Partition Baffle: (face panel) One of the most important feature of any air-cooled slide in system, but the most over looked is the Partition Baffle. The Partition Baffle is responsible in preventing the re-circulation of heated air generated by the engine & heat exchange system. All White Magic slide-ins have been designed with this feature in mind. The signature series partition baffles are connected by gasket material to the air intake of the engine housing to insure proper airflow of the machine is achieved.

2. Engine: 15 HP Kohler Air Cooled Engine, Kohler Command Pro Engines are designed with overhead -valves, exclusive hydraulic valve lifters, full pressure lubrication. All Command Pro Engines are fitted with a Plate-type oil cooler which helps maintain proper engine function.

3. Belt Guard: an aluminum safety guard, protecting the operator and machine from harm, covers the pulley & belts.

4. CAT PUMP ® 3CP Pump: Far superior from any other pump manufacturers, Cat pump delivers outstanding reliability and performance. Mounted in the machine high above all other components allows for quick and easy service of the pump. While performing service the pump does not need to be un-bolted or readjusted, all service can be done in place. This saves hours of down time and expense to the equipment owner.

5. Pulsation Dampener: This is a nitrogen charged shock absorber for the pumping system. As the ceramic plungers push water into the system, a vibration is given off. The pulsation or vibration is absorbed helping prevent premature failure of fittings and components.

6. Oil Drain valve: The signature series offers this outstanding feature only found on White Magic Equipment. The Engine, Pump, and Blower all are furnished with ¼” ball valves for quick access to oil changes. As an added benefit the oil drains are connected together in one central line and exit the machine through the face panel. (See point # 7 on the external features page) This eliminates any chance of messy oil spills during routine services.

7. Heat Exchange System: Making up the heart of the Heatsmart Technology is our double barrel heat exchanger. Constructed with the White Magic exclusive High Efficiency Finned Copper Coil, this coil is far superior to other coil designs found elsewhere in the United States. The heat exchanger is designed to maximize both airflow and heat transfer. As the water flows through the heat exchanger it enters at the coolest point and exits the heat exchanger at the hottest point. This is commonly referred to as Reverse Flow.

8. ROOTS™ 33 Blower: White Magic has selected ROOTS™ as our exclusive vendor for Vacuum Blowers. The Rebel is outfitted with the ROOTS™ 33 blower providing over 200 CFM and 14”Hg of vacuum lift. This Blower is capable of producing exceptional performance for all aspects of residential carpet & upholstery cleaning. The dual lobe blower design is far superior and more reliable to the new tri-lobe blower designs available in the cleaning industry. White Magic provides many additional features to the blower system such as: Blower oil level site tube, remote grease fittings for ease of maintenance & the White Magic exclusive grease cup, which captures expelled grease and prevents it from spilling all over the internal components of the machine.

9. Frame Assembly: Constructed from heavy gauge steel, the frame also provides easy lifting with its built in fork lift pads.

10. Progressive Silencing System: White Magic engineers have worked tirelessly to maximize performance without restricting airflow. The Progressive Silencing system works by stepping down the noise generated by the carpet cleaning system at specific locations throughout the machine. Illustrated in this photo is the last stage of the silencing system.

Right side view:

11. Vacuum Pod Diverter Control: As the temperature reaches its predetermined setting established by the operator, the Temperature Sensor sends an electrical signal to the vacuum control vacuum switches (18) which activates the Vacuum Pod (11) to open and close the Heat Diverter (13). to maintain the desired operating solution temperatures.

12. Chemical Injection Pump: This pump operates with out the use of a diaphragm spring, which add to the longevity of the pump. The Chemical is injected at the final stage of the pumping system. This eliminates chemical residue build-up within the pumping system, heat exchange system and system controls. Made completely out of stainless steel with a high pressure O’ ring, this pump will resist corrosion and damage caused by high pressure tile cleaning, better then similar pumps made out of brass.

13. Engine Exhaust Heat Diverter: This component operates by directing the flow of hot gases produced by the engine. During operation of the machine the heat generated by the engines exhaust will flow the heat exchange system to heat the cleaning solution. Once the cleaning solution has reached the pre-determined temperature set by the operator the temperature sensor (25) will activate the vacuum diverter control (11) closing the Exhaust Diverter preventing the hot gases from entering the heat exchange systems. The Heat Diverters internal components are made from Stainless Steel and are nickel-plated to extended the life of the diverter.

14. Stainless Steel Braided Hoses: White Magic uses only Stainless Steel high-pressure hoses to interconnect the systems solution and pumping system.

15. Water Mix Valve: This convenient feature allows for further temperature adjustment for sensitive fabric cleaning such as; wool oriental carpets or Haitian cotton upholstery etc… By opening this valve it allows cold water from the pump to bypass the Heat Exchange System and go directly to the cleaning tool.

16. Temperature Gauge Sending Unit: Located just behind the solution disconnects away from any of the heat exchanger components, this sending unit reads the out going solution temperature and displays the temperature on the temperature gauge

17. Primary System Kill Switch: This is the primary engine kill switch interrupts the engine electrical system and shuts down the machine if the solution temperature reaches the factory setting of 285°F. It can be adjusted by a service technician if necessary. If this occurs the operator can quickly determine the cause or the shut down by looking at the indicator lights on the face panel of the machine.

18. Vacuum Pod Control Switch: Refer to # 11

19. Engine Oil Filter: The design of the machine allows for easy changing of the Oil Filter.

20. High Pressure Fuel Safety Valve: This Valve protects the engine fuel system from forcing fuel back from the vehicles fuel system.

21. Pressure Reducer: Located on the input of the water box the pressure reducer assures that the input water pressure is consistent, for extra protection of the internal float valve.

22. Water Box: Constructed from Stainless Steel, the water box provides the incoming water to the pump. The box can contain a max. of 2 gallons of water and a host of other features. The water box has 4 easy to remove thumbscrews that hold down the gasket material cover, preventing water from spill over on to the machine. The water box also has overflow protection, filtered input and allows for simple winterization of the machine in cold weather climates.

23. Secondary Safety Kill Switch: This safety feature protects the operator, bystanders and the machine from dangerous overheating of the systems water temperature rating. This Safety Kill Switch will shut the machines engine down if the solution temperature exceeds 275°F.

24. Pressure Relief Valve: This valve is factory set to prevent over pressurization of the machine. When the machine reaches it’s setting the valve opens to relieve access pressure developed by the pumping system. This valve allows the operator to adjust the pressure up to 1200 PSI for tile and grout cleaning.

25. Temperature Sensor: Located at the hottest point of the heat exchanger,this sensors function is to control the heat diverter system. When the operator adjusts the temperature knob located on the face panel of the machine it controls the sensitivity of this sending unit, providing the desired temperature to the cleaning tool.