Directions: First dispose/empty any old contents from inside fresh water tank. Shake De-scaler before use.

Option 1: Use to maintain equipment on a daily bases. At the end of every day, mix 16 ounces of De-scaler in one gallon of water in the fresh water. Place mixed contents in fresh water tank. Turn on pressure pump and allow contents to flow through extractor, hoses, and wand.

Option 2: Restore heater/extractor or to unclog lines. Place entire contents into fresh water tank. Up to 5 gallons of straight De-scaler may be needed. Hook up priming/bleeder hose so open end of hose feeds back into fresh water tank. Turn on pump and heater and recycle product through system until water gets warm (150 degrees F). Turn off pump and heater and allow De-scaler to sit inside machine for at least 30 minutes. Flush system with fresh water when finished. Note: strainers and filters may clog regularly for one week after using De-scaler. Clean filters weekly.