TURBOJET MODEL 4200
Air Care constantly strives to improve the performance, convenience and efficiency of all its products and test them in the field for reliability and maneuverability. The Model 4200 Dual Motor Turbojet is the latest, most powerful portable negative air machine Air-Care has ever produced, yet it will even run on 15 AMP, fused circuits. Both motors are 1.5 Horsepower, 3 phase, high efficiency units with individual variable speed inverters featuring Electronic Speed Processing (ESP) and ramp up starting to eliminate the power surge that most portable duct vacuums generate. Each motor can be independently set to run on either a 15 amp or a 20 amp circuit. Two independent circuits are required to run both motors. If only one circuit is available, one motor can be used to produce virtually the same pull as a single motor Turbojet. The 4200/4200S are the smallest dual motor negative air machines on the market today. The 4200 & 4200S will handle large commercial air duct systems, but are small enough for residential use as well. They feature non-marking wheels, built in stair-climber, upper handle rollers for horizontal use and to assist in loading into your service vehicle, with 16" & 12" inlets (included). The 3 stage filtration features a 200 micron reusable 1st stage bag filter, 2nd stage electrostatic air filter and a 3rd stage 23.5x23.5x8 high density pleated Certified HEPA filter.	Item #CE4200 & #CE4200S
Specifications Turbojet 4200   Size    25.3" W x 29" D x 53" H      Weight    240 lbs.      Power Required    115 V 60 Hz @ 13-17 amps x 2      Power Connections    TWO 3-wire inlets w/two 20 amp breakers      Power Cord    Two 12 gauge x 50 Ft. power cords      Air Flow    5000 CFM free air/ 3500 CFM filtered      Static Pressure    5.0"      Attachment    16" &12" twist lock couplers      Exhaust Hose    Optional 12" twist lock couplers (2)      Filtration    3 Stage + 4th stage pre filter      Pre-Filter    Pellon vapor barrier      First Stage    24" x 24" x 8" washable "slide-in" filter      Second Stage    23.5x23.5x1 Electrostatic, permanent      Third Stage    23.37 x 23.37 x 8 certified HEPA      Operating Range    25-125 deg. F (-4 to 50 deg. C)      Construction   Aluminum  reinforced with steel      Control Panel    Single plug-able panel w/pressure gauge, 2-Ammeters, 2-speed controls & 2-start/stop rocker switches      Blower     TWO-Backward Inclined      Motor & Inverter    TWO -1.5 HP 3 phase motors & 2 single phase to 3 phase inverters w/soft start & dual speeds       Finish  Textured powder coat   The Turbojet Model 4200S shares most of the features of the 4200, except it has single speed motors that pull 13 amps each. It can be run with one or two motors in horizontal or vertical position. The 4200S does not have the soft start feature but produces the same CFM as the 4200 in "Low" speed mode.
TURBOJET 4200 FEATURES • Dual 3 phase 1.5 HP motors • Dual blowers • Backward inclined blowers • Low speed 13 amp & high speed 17 amp operation • One or both motors can be used • 3-stage certified HEPA filtration • Mini-pleat HEPA filter triples filter life • Horizontal or Vertical operation • Control panel located at the top of machine • Aluminum construction with steel reinforcement • Attractive, durable powder coat finsh • Operates on 15 or 20 amp circuits • Exhaust Flange Kit available • Soft Start   TURBOJET 4200S FEATURES • Dual high efficiency motors • Dual blowers • Backward inclined blowers • 13 amp operation • One or both motors can be used • 3-stage certified HEPA filtration • Mini-pleat HEPA filter triples filter life • Horizontal or Vertical operation • Control panel located at the top of machine • Aluminum construction with steel reinforcement • Attractive, durable powder coat finsh • Operates on 15 or 20 amp circuits • Exhaust Flange Kit available "All Turbojets can be run horizontally for easy attachment to floor registers or to connect to basement ducts without taking them down stairs." Two motor operation requires 2 independent circuits.